Suspension line flow for canning production line device

For large production lines, determine the center line of equipment or device reference line according to the method of "antenna fixed ground line, ground line adjustment antenna". When fixing the suspension wire support, it should not affect the traffic, personnel and equipment are not easy to touch. As the device precision of all equipment in the production line should be based on this line, a little error will affect the device precision.

For equipment with requirements on height, if it is inconvenient to hoist the cable directly above the equipment, move the cable to a position that does not interfere with the equipment. The heavy hammer hanging on the suspension line swings when it is blown by the wind, which affects the measurement accuracy. The heavy hammer can be suspended in an oil pot, which can effectively avoid the influence of the wind.

After the equipment is installed, the antenna should be kept for a year, so the reasonable orientation of the antenna and the fixed bracket should be planned in advance